Professions & Salaries

Chemical Lab Technician Ausbildung

Chemical lab technician Ausbildung (German: Chemielaborant or Chemielaborantin) is a three-and-a-half-year dual training in industry. You work in a laboratory, choose six of 20 specialist topics and sit a two-part final exam. No school certificate is required by law, but employers usually expect good science grades.

This guide explains what the job involves, who can apply, what the training contains and how both exam parts work under the current regulation, which dates from 2020 and was last amended in 2022.

What a chemical lab technician does

The BIBB (Federal Institute for Vocational Education and Training) describes the job in its occupation profile. Chemical lab technicians analyse inorganic and organic substances, plan experiments, build apparatus, produce preparations and separate or purify mixtures. They measure, document and evaluate data, follow rules on safety and waste disposal, work with quality management and handle regulations in German and English. Typical workplaces are research, development and production laboratories in the chemical and pharmaceutical industry, universities, medical analytics, environmental protection and testing offices.

The IHK Rheinhessen (a regional chamber of industry and commerce) adds that you record chemical processes in test reports, operate and maintain equipment, take samples and prepare solutions. Teamwork, documentation and responsible action (Responsible Care, the chemical industry’s safety and environment principle) are part of the job.

Chemical lab technician Ausbildung at a glance

  • Type: dual training in industry and trade, regulated by a national training regulation.
  • Duration: three years and six months (§ 2 of the regulation).
  • Learning places: the training company and the vocational school (Berufsschule). Our guide to Berufsschule explains how school days work.
  • Regulation: the Verordnung über die Berufsausbildung im Laborbereich Chemie, Biologie und Lack, in the version published on 24 April 2020 and last amended on 10 February 2022. The same regulation covers biology lab technicians and paint lab technicians, which is why its web address still contains the year 2009.
  • Your chamber: the BIBB lists the job under industry and trade, so the responsible body is normally an IHK (chamber of industry and commerce).

The regulation text in the version we read contains no separate transition rule for trainees who started under older rules, and we could not read its closing section (§ 25) in full. The IHK Rheinhessen page separates contracts signed before and after 1 August 2020. If your contract is older, ask your chamber which rules apply to your exams.

Who can apply

The regulation sets no school qualification. The company decides whom to hire. As one example, the University of Potsdam, which trains chemical lab technicians, asks for at least the intermediate school certificate (Fachoberschulreife) with good grades, especially in science subjects. It names chemistry, physics, biology and maths as helpful subjects and computer science as desirable. Other employers set their own rules, so read each advert closely.

Our guide on how to apply for Ausbildung covers the application steps. Because laboratory places are limited at each employer, ask early what the company wants to see and when it starts selecting.

What you learn

The training has two blocks. Part A is compulsory. It contains the qualifications shared by all three laboratory jobs, taught in an integrated way, and the qualifications specific to chemistry. Part B is your choice: the training company picks six specialist topics (Wahlqualifikationen) from a list of 20 (§ 3 and § 4 of the regulation). The IHK Rheinhessen states that each of the 20 lasts 13 weeks, which fits six electives into about 78 weeks of the training. The company must also write an individual training plan, based on the training framework plan (Ausbildungsrahmenplan).

The 20 specialist topics

The regulation lists these topics. A company usually covers only some of them, so ask which six you would learn before you apply.

  1. Preparative chemistry: reaction types and procedures
  2. Preparative chemistry: synthesis technique
  3. Process engineering work
  4. Sampling and analytical methods
  5. Chromatography methods
  6. Spectroscopy methods
  7. Microbiological work
  8. Testing of materials
  9. Making, applying and testing coatings and coating systems
  10. Process-related working techniques
  11. Environment-related working techniques
  12. Digitalisation in research, development, analytics and production
  13. Working with networked and automated systems
  14. Application-technology work and customer support
  15. Quality management
  16. Immunological and biochemical work
  17. Genetic engineering and molecular biology work
  18. Cell culture work
  19. Formulating, making and testing binders
  20. Colour measurement work

Each topic changes what a normal week looks like. A company focused on analytics will lean on chromatography and spectroscopy. A company in coatings will teach colour measurement and binders. Your six topics also feed into one of the final-exam areas, as described below.

The first exam part

The final exam (Abschlussprüfung) has two separate parts, and this regulation does not use a classic interim exam. Part 1 (Teil 1) should take place before the end of the second year and covers the content of the first 84 weeks, plus the matching school content. It counts for 35 percent of the overall result. It has two areas:

  • Making and characterising products: two practical work tasks with 480 minutes in total. Task I covers preparative work and counts 70 percent. Task II covers characterising products and counts 30 percent. The exam tests whether you can plan work steps independently, check and document results, do job-related calculations and include safety, environmental protection and quality management.
  • General and preparative chemistry: written, 135 minutes.

Each of the two areas counts for 17.5 percent of the final result.

The second exam part

Part 2 (Teil 2) takes place at the end of training and counts for 65 percent. It has three areas:

AreaForm and timeWeight in the final result
Process-oriented workPractical, 660 minutes, two tasks weighted 40 and 60 percent27.5%
Analytical chemistry and specialist topicsWritten, 195 minutes. The tasks on the first two parts count 40 percent in total, the third part counts 60 percent27.5%
Economics and social studiesWritten, 60 minutes10%

The weights show where to put your preparation. The two practical areas, making and characterising products and process-oriented work, add up to 45 percent. The two chemistry-related written areas add up to another 45 percent. Economics and social studies counts for only 10 percent, but see the pass rule below before you ignore it.

How you pass

You pass the final exam only if all four conditions are met:

  1. the overall result of Part 1 and Part 2 is at least ausreichend (sufficient),
  2. the result of Part 2 on its own is at least ausreichend,
  3. the areas process-oriented work and analytical chemistry and specialist topics are each at least ausreichend,
  4. no area in Part 2 is rated ungenügend (insufficient).

The third condition matters: a strong result in one of those two areas cannot cover a weak result in the other. Our guide to Ausbildung exams explains how interim and final exams work in general.

There is a safety net. If a written area in Part 2 is worse than ausreichend and an oral exam could decide whether you pass, you can request an oral supplementary exam (mündliche Ergänzungsprüfung) of about 15 minutes. The earlier result and the oral result are weighted 2 to 1.

The training record and pay

The regulation text we read does not set rules on a training record (Berichtsheft). Ask your chamber and your company how it is handled for admission to the exam. We do not list pay figures here. Pay depends on your contract and the agreements that apply, so read our guide to Ausbildung salary for how pay works in general and ask the company before you sign.

Is it right for you?

The job rewards careful, patient people who can follow a procedure exactly and document it. The exam reflects this: the practical areas count for 45 percent, and the written areas for the rest, so you need both lab skill and theory. Ask for a trial day or visit if the company allows it, and ask these questions:

  • Which six specialist topics do you train in?
  • Which laboratories will I work in, and will I rotate between them?
  • Who is my trainer, and how is the training plan organised?
  • How do trainees prepare for the 660-minute and 480-minute practical tasks?

FAQ

How long is chemical lab technician Ausbildung?

Three years and six months, according to § 2 of the regulation.

Do I need a school certificate?

The regulation sets none, but employers usually expect good science grades. One university trainer asks for at least the intermediate school certificate.

What is the difference between a chemical lab technician and a chemist?

A chemist usually studies at university. A chemical lab technician trains in a company and works in the laboratory on analyses, syntheses and tests. This guide covers only the training route.

Is there an interim exam?

Not in the classic sense. The final exam is split into Part 1 and Part 2, and Part 1 takes place before the end of the second year and counts for 35 percent.

How many specialist topics do I learn?

Six, chosen by the company from a list of 20.

Which chamber is responsible?

Normally the IHK, because the job is listed under industry and trade. Confirm this with your company.

Sources

Last updated: 10 November 2026. Rules and figures can change, so confirm details with the official source before you decide.